Request a Stand Proposal →

ProMat 2027 Booth Builder Chicago: McCormick Place Rules

•By Exhibition Stand Pro Team

Short answer: ProMat 2027 runs April 19–21, 2027 at McCormick Place, Chicago, where union trades handle most booth labor. Exhibition Stand Pro (VAV Grup) designs your custom material-handling booth, builds and pre-assembles it in its own production facility in Istanbul and ships it to Chicago; send your booth number and size on WhatsApp +90 532 457 67 78 or through the quote form for a free first design.

ProMat 2027 at a glance

Item ProMat 2027
Show dates Mon April 19 – Wed April 21, 2027
Hours 09:00–17:00 daily
Venue McCormick Place, Chicago
Organizer MHI
Space draw (MHI, March 2026) 930 companies, 977 booths, 653,600 net sq ft, 94% of the floor
Move-in / move-out Not readable on the public site
Official service contractor Not confirmed on public pages
Multi-level plans About February 18, 2027 (60 days before opening)

Checked on ProMat, MHI and McCormick Place pages on November 3, 2026. The Exhibitor Resource Center returned no readable content; we update this page once the 2027 kit details are public. Booth space is largely drawn, so talk to us before your space is final.

Who does what at McCormick Place

Task Who does it
Electrical work on powered equipment Union electricians
Plumbing Union plumbers
Material handling (except machinery) Union teamsters
Signs and drape Union decorators
Rigging Union riggers
Voice and data McCormick Place Technology Services
Hand-carry of small packages, including pop-up booths Exhibitor (four-wheel dollies are not permitted)
Own booth setup with own hand and power tools Exhibitor’s full-time employees with 6+ months of service

The Illinois exhibitor rights cover employees, not contractors. If you plan to send your own staff, bring proof of employment and read the current rules before you arrive.

Multi-level booth rules

These are venue rules. ProMat’s own height rules are not readable on the public pages yet.

Rule Requirement
Plans Stamped by a licensed structural engineer, with dimensions and isometric view
Deadline At least 60 days before the show opens
Second level Must stay open and uncovered, otherwise sprinkler protection applies
Three or more levels Special sprinkler coverage
Stairs At least 3 ft wide, handrail on one side, no spiral or winding stairs
Second staircase If top deck holds over 10 people or exceeds 1,200 sq ft
Smoke detection Battery smoke detectors under the second level
Fabrics NFPA-701

Exhibits avoid a sprinkler requirement if they stay at or under 2 levels high (maximum 30 ft) or 5,000 sq ft of enclosed area.

Hanging signs and booth format

  • Hanging signs need a booth of at least 600 sq ft.
  • LIFO booths are limited to 400 sq ft.
  • “Island Only” booths are open on four sides.
  • Hanging items of 500 lb or more need stamped engineer drawings.
  • MIS and Octonorm sign systems are not permitted at the venue.

Shipping a booth from Istanbul to Chicago

We pre-assemble your booth in Istanbul, photograph it and pack it for assembly by the on-site trades with clear instructions. Ocean freight sets your calendar, so a late design decision is the most expensive one. Read our guide to shipping a trade show booth to the USA before you plan your budget.

Timeline from today

When What to do
November–December 2026 Send booth number and exhibit list; first design and quote
January 2027 Approve design; engineer drawings if multi-level
By about February 18, 2027 Submit multi-level plans to McCormick Place
February 2027 Production, pre-assembly and ocean freight booking
March–April 2027 Transit and customs; target delivery per the show kit
April 19–21, 2027 Show, then dismantling and return

How we deliver ProMat booths

You get one project manager, a free first design and a booth built in our own production facility. See our Chicago booth builder page, the ProMat show page, our EAC explainer and our HIMSS Chicago show page.

Get your ProMat 2027 proposal: request a quote or WhatsApp +90 532 457 67 78.

Official sources used

Frequently asked questions

ProMat 2027 runs April 19–21, 2027 at McCormick Place, Chicago, 09:00–17:00 each day. MHI organizes the show.
Union trades are hired through the official service contractor chosen by show management: carpenters, decorators, electricians, plumbers, riggers and teamsters. Illinois law lets an exhibitor's own full-time employees, with at least 6 months of service, set up and dismantle within the booth using their own hand and power tools. That right does not transfer to contractors.
McCormick Place requires stamped plans from a licensed structural engineer at least 60 days before the show opens. Counted from April 19, 2027 that is about February 18, 2027. Show-level ProMat deadlines may differ, so check the exhibitor manual.
An Exhibitor Appointed Contractor must register annually with MPEA for a USD 200 fee and carry the listed insurance: general liability USD 1M per occurrence, auto USD 1M, statutory workers comp and employer's liability USD 1M. Badges and additional insured requirements also apply.
The ProMat 2027 space-draw FAQ says hanging signs need a booth of at least 600 sq ft. All hanging requests need show management approval, and hanging items of 500 lb or more need stamped engineer drawings.
No. Exhibition Stand Pro builds in its own production facility in İkitelli OSB, Istanbul and ships the booth to Chicago. We have no US crew. Installation follows McCormick Place labor rules and the official contractor's terms, coordinated by our project manager.

Start Your Stand ProjectProject Brief

Share the show, city and stand size so we can define the right project scope.

Project-led delivery
In-House Factory
Portfolio on request
Technical support

Global Exhibition Stand Design & Build Locations

We provide turnkey exhibition stand design, production, and installation services at major trade show venues worldwide. Explore our country and venue guides for your target destination.

CallWhatsAppGet Quote