DSEI Germany 2027 stand builder for the Hannover fairgrounds
DSEI Germany 2027, 9–12 March, Hanover Fairgrounds: eight zones, EZONE exhibitor portal, Deutsche Messe stand rules and a custom stand builder. Free quote.
What should exhibitors know about stand building at DSEI Germany 2027?
DSEI Germany 2027 is a new defence and security show running 9–12 March 2027 at the Hanover Fairgrounds, run by Deutsche Messe in partnership with the organisers of DSEI. Build-up times sit in the exhibitor portal, EZONE. Exhibition Stand Pro designs, produces and installs custom stands for exhibitors who must also meet Deutsche Messe's technical regulations.
- Show
- DSEI Germany 2027
- Location
- Hannover, Germany
- Production
- Own production facility, Ikitelli OSB, Istanbul
- First concept and quote
- Free of charge
DSEI Germany 2027 at a glance
DSEI Germany takes place from Tuesday 9 to Friday 12 March 2027 at the Hanover Fairgrounds, 30521 Hannover, with daily hours of 10:00 to 18:00 listed by the city of Hannover. This is the first edition of DSEI Germany. The official site describes 125,000 square metres and eight domains: Air & Space, Land, Naval, Cyber & Information, Joint Support, Regional Pavilions, International Pavilions and Industrial Solutions. Deutsche Messe, BDSV, Bitkom and Clarion Defence & Security are named as partners.
Halls, floor plan and getting there
On 16 October 2026 DSEI Germany had not published hall numbers or a floor plan on its public site. The exhibitor information page points exhibitors to the EZONE portal for build-up and breakdown times, so that is where a plan should appear for confirmed exhibitors.
The grounds can be reached by light rail, and the Hannover Messe/Laatzen station takes long-distance trains and, during large shows, regional trains. The A2 and A7 motorways connect directly, and the Hannover tourism board counts about 39,000 car parking spaces.
DSEI Germany 2027: key facts for exhibitors
Official dates
9–12 March 2027
Venue
Hanover Fairgrounds, 30521 Hannover
Daily hours
10:00–18:00, as listed by the city of Hannover
Edition
First edition of DSEI Germany
Scale
125,000 square metres; eight domains
Partners named
Deutsche Messe, BDSV, Bitkom and Clarion Defence & Security
Floor plan
Not public on 16 October 2026; build-up and breakdown times via the EZONE exhibitor portal
Stand height
6.50 m including suspended objects; 6.00 m in Hall 8; 4.00 m in Hall 18 (Deutsche Messe Technical Regulations, 2026 edition)
Planning guides
Official sources
Facts checked against public pages on 16 October 2026; dates and rules can change.
Rules that apply
DSEI Germany's own conditions come first, and its exhibitor pages refer to a Compliance & Eligibility to Exhibit policy. Live ammunition and pyrotechnics may not be displayed. Deutsche Messe's Technical Regulations, in their 2026 edition, govern building on the grounds. Stands may be up to 6.50 m high including suspended objects, with 6.00 m in Hall 8 and 4.00 m in Hall 18. Stand design plans are required above 100 m², at least four weeks before set-up. Multi-storey stands need approval, with drawings four weeks and a building permit file two weeks before set-up. Only an authorised Deutsche Messe provider may hang objects from hall ceilings, and none may be hung in Halls 8, 9 and 26.
How we build for DSEI Germany
As a first edition, DSEI Germany has no earlier exhibitor manual to copy from; the EZONE portal and Deutsche Messe's regulations are the documents to work from. Our production facility produces every stand in-house and our own crews put it up on site. We serve exhibitors from across Europe, Türkiye, the USA, Canada and the Middle East. Our defence booths page explains how we approach security-sector stands.
Request a DSEI Germany concept and quote
Send us your zone, stand size and a short brief, and we will tell you which points to confirm in EZONE before design starts. You pay nothing for a first concept and quote. Talk to us.
Claim Your Free 3D Design
Send us your hall, stand number, size and a short brief. A first concept and a quote are free of charge.
Start Your Stand ProjectProject Brief
Share the show, city and stand size so we can define the right project scope.
Our 5-Step Process
We have perfected a seamless workflow to guarantee a stress-free experience for international exhibitors traveling to Germany.
- Briefing & Concept: We analyze your brand guidelines, product dimensions, and marketing goals.
- Free 3D Architecture: You receive a high-resolution 3D render of your custom booth, allowing you to visualize exactly what will be built.
- In-House Manufacturing: Upon approval, our carpenters and technicians construct the booth using premium materials (wood, aluminum, LED).
- Logistics & Assembly: We handle the shipping and our expert installation crew builds the stand before you even arrive.
- Handover & Support: We do a final walkthrough with you on-site and provide technical support throughout the event.
Where we build and support your stand
İkitelli OSB
Production facility, Istanbul
Hannover
Local base: storage, quality checks, on-site support
Independent
Stand contractor working to organiser rules