Request a Stand Proposal →

Expo West 2027 Booth Builder: Anaheim Rules & Timeline

•By Exhibition Stand Pro Team

Short answer: Natural Products Expo West 2027 runs 2–5 March 2027 at the Anaheim Convention Center, with exhibit halls open 3–5 March and GES as official contractor. Exhibition Stand Pro (VAV Grup) designs your custom booth, builds it in its own production facility in İkitelli OSB, Istanbul and ships it to Anaheim; send your booth number and size on WhatsApp +90 532 457 67 78 or through the quote form for a free first design and quote within 48 hours.

Expo West 2027 at a glance

Item Natural Products Expo West 2027
Event 2–5 March 2027 (education from 2 March)
Exhibit halls Wednesday 3 to Friday 5 March 2027
Venue Anaheim Convention Center, 800 W Katella Ave, Anaheim CA
Organiser New Hope Network / Informa Markets
Official contractor GES (Exhibitor Service Kit)
Venue exclusives Encore (rigging in designated areas), Smart City Networks (internet/telecom)
2027 halls and move-in Not yet public; 2026 used Halls A–E and the Arena
2026 edition (organiser figures) 66,000 registered attendees, 3,200+ exhibiting brands

Checked on expowest.com and the venue’s rules on 31 October 2026. At least one builder site still lists a different city for 2027; the show stays in Anaheim.

Booth rules that decide your design

The 2027 Exhibitor Service Kit is behind the exhibitor login. Past GES booth regulations show the envelope to plan for:

Element Rule in past editions (confirm for 2027)
Island and peninsula Up to 16 ft; 12 ft in Hall E
In-line Nothing over 4 ft in the front half; rear up to 8 ft 3 in
Hanging signs Only over island, peninsula and 20×20 ft+ end-caps; max 20 ft to top; 10 ft set-back; none in Hall E
Roofs, canopies, two-story Advance approval from show management and fire marshal

Venue rules from the Anaheim Convention Center policies (revised July 2023):

  • Two-story booths need a drawing stamped by a California-licensed structural or civil engineer and Anaheim Fire & Rescue approval.
  • Screens, walls or risers above 8 ft that block exits or aisles need a non-standard floor plan.
  • Hard-back walls sit at least 9 inches from the rear booth line; covered structures need a smoke detector per 900 sq ft.
  • Move-in and move-out run on the west side; hand-carry is single-trip only, without dollies or carts.

Hall ceilings differ a lot (Visit Anaheim data): Halls A–C about 18–25 ft, Hall D 25 ft, Hall E only 13 ft 8 in. A tall island design that suits Hall D will not fit Hall E, so we check your hall before we draw.

Food and beverage booths: what to plan early

Expo West is a sampling show. Plan these with the booth, not after it:

  • Counters and storage sized for daily sampling stock and fridges
  • Power for refrigeration and coffee or blender demos, ordered through the official channels
  • Hand-wash or sink needs, which depend on the show’s food safety and sampling guidelines
  • Lighting that keeps packaging colours true on camera

How we deliver a booth to Anaheim from Istanbul

  1. Design in 3D against GES and venue rules, with sampling flow planned in.
  2. Production in our İkitelli factory, with a full pre-assembly.
  3. Freight to the GES advance warehouse or show site; see shipping a trade show booth to the USA.
  4. Installation under GES and venue rules, coordinated by our project manager.
  5. Dismantling, storage or return agreed before opening.

We have no US office or own crew, and we say so up front.

Countdown to 2 March 2027

Date What happens
Mid-November 2026 Brief: booth number, hall, size, sampling plan
November 2026 GES services (organiser lists “GES Services (November 2026)”); Exhibitor Service Kit through the exhibitor login
Early December 2026 Design frozen; booth approval drawings ready
December 2026 – January 2027 Production and pre-assembly in Istanbul
Early January 2027 Ocean freight departs
February 2027 GES discount-deadline orders (in 2026: about three weeks before the show)
3–5 March 2027 Exhibit halls open

About four months is tight for ocean freight to California, so a decision in November keeps the cheaper sea option open.

What to send for your free pre-design

  • Booth number, hall and size in sq ft
  • Booth type: in-line, corner, peninsula or island
  • Logo as a vector file and brand colours
  • Products, fridges and sampling equipment with sizes and power
  • Meeting seats and storage needs

Get your Expo West 2027 quote: request a quote or WhatsApp +90 532 457 67 78.

Related: Natural Products Expo West exhibition page, trade show booth builder in Anaheim, NAB Show 2027 booth builder guide, trade show booth timeline from brief to install and exhibition stand builder in the USA.

Official sources used

Frequently asked questions

Natural Products Expo West 2027 runs 2–5 March 2027 at the Anaheim Convention Center, 800 West Katella Avenue, Anaheim, California. Education starts on Tuesday 2 March; the exhibit halls are open Wednesday 3 to Friday 5 March.
GES is the official services contractor. Forms, shipping, deadlines and orders sit in the GES Exhibitor Service Kit, which opens through the exhibitor login about five months before the show. At the venue, Encore handles rigging in designated areas and Smart City Networks is exclusive for internet and telecom.
In past editions GES booth regulations allowed island and peninsula booths up to 16 ft (12 ft in Hall E), with in-line booths limited to 4 ft in the front half and 8 ft 3 in at the rear. The 2027 rules are in the Exhibitor Service Kit, so confirm them before the design is frozen.
Only with approvals. Past GES booth regulations required advance written approval from show management and the fire marshal for roofed or multi-story booths (confirm in the 2027 Exhibitor Service Kit). The Anaheim Convention Center rules say Anaheim Fire & Rescue approves all two-story booths and requires a drawing stamped by a California-licensed structural or civil engineer.
Not yet on public pages (checked 31 October 2026). In 2026 move-in started four days before the halls opened and the GES discount deadline was about three weeks before the show; treat that only as a guide to the 2027 pattern.
No. We design and build in our own factory in Istanbul and ship the booth to Anaheim. We have no US crew. Installation follows venue and GES rules, with labour arranged as the 2027 rules allow, coordinated by our project manager.

Start Your Stand ProjectProject Brief

Share the show, city and stand size so we can define the right project scope.

Project-led delivery
In-House Factory
Portfolio on request
Technical support

Global Exhibition Stand Design & Build Locations

We provide turnkey exhibition stand design, production, and installation services at major trade show venues worldwide. Explore our country and venue guides for your target destination.

CallWhatsAppGet Quote