Request a Stand Proposal →

BAU 2027 Hall Plan, Build-up Dates & Stand Rules

•By Exhibition Stand Pro Team

Short answer: BAU 2027 runs 11–15 January 2027 at Messe München in 19 halls (A1–A6, B0–B6, C1–C6) plus the ICM. Stand set-up is 4–10 January and dismantling 15–19 January 2027. The most urgent date is 11 November 2026: the deadline for technical and rigging orders in the BAU Exhibitor Shop. Stands over 3 m high or 100 m² need TAS approval.

Building at BAU 2027? Request a stand quote or WhatsApp +90 532 457 67 78. Send your hall and stand number and we return a design direction and budget range within one business day.

BAU 2027 at a glance

Item BAU 2027 (official)
Show days 11–15 January 2027
Venue Messe München, Am Messesee 2, 81829 München
Halls 19 halls: A1–A6, B0–B6, C1–C6, plus ICM
Set-up 4–10 January 2027
Dismantling 15–19 January 2027
Technical & rigging orders by 11 November 2026 (Exhibitor Shop)
Standard stand height 3 m (higher needs TAS approval)

Sources: Messe München — BAU 2027, BAU tips, dates and deadlines.

BAU 2027 hall plan: where to find it

The official sector list on the hall-plan page is the reference; check your own hall there before you brief a designer, because hall height, rigging points and access gates differ between the A, B and C rows.

Set-up and dismantling times

Official logistics page times (BAU logistics & traffic):

Day Hours
4–9 January 2027 (set-up) 07:00–23:00
10 January 2027 (last set-up day) 07:00–18:00 (vehicles out 18:00, decoration until 20:00)
15 January 2027 (dismantling starts) 18:00–24:00
16 January 2027 00:00–23:00
17–18 January 2027 07:00–23:00
19 January 2027 07:00–18:00

Note: the official page also shows separate lines for hall B0 with different hours, and those lines are not fully consistent. If your stand is in B0, confirm times with the organiser before booking crews.

Delivery slots run through Messe München’s FairLog portal. Large stands need a truck slot plan; we book it as part of our service.

Deadlines that decide your budget

  1. 11 November 2026 — technical service orders (power, water, compressed air, internet) in the BAU Exhibitor Shop. Late orders cost more.
  2. 11 November 2026 — suspension/rigging orders, with a detailed load plan. Hanging banners and truss need this.
  3. Stand documents to TAS3 (tas3@messe-muenchen.de) when height > 3 m, area > 100 m², covered areas or a vehicle on display. No fixed date is published; the Technical Guidelines refer to the deadline in the ordering media, so submit as early as possible.

BAU stand rules in plain English

From Messe München’s Technical Guidelines (PDF):

  • Standard height is 3 m. The event’s maximum height is set in the Special Terms; above that needs written TAS approval.
  • Two-storey stands, large stands and covered areas need approved drawings before construction.
  • Rigging only through the official suspension service.

Building products exhibitors at BAU often show heavy samples — façades, windows, tiles, machinery. Floor load, forklift slots and dismantling time must be in the plan from day one. Our Germany exhibiting rules guide and stand rules by venue cover the general German requirements.

What a BAU 2027 stand costs

Cost depends on size, storeys and finish. For German benchmarks per m² see exhibition stand cost in Germany per sqm. We build in our own Istanbul factory and truck the stand to Munich; it is pre-assembled and checked before it leaves.

Why exhibitors choose us for Munich

  • Production: own production facility in İkitelli OSB, Istanbul.
  • Germany logistics: our own warehouse in Düsseldorf and a local base in Hannover.
  • One project manager from design to dismantle.

See our BAU Munich show page and exhibition stand builder in Germany.

Get your BAU 2027 quote: request a quote or WhatsApp +90 532 457 67 78.

Official sources used

Article FAQs

BAU 2027 runs 11–15 January 2027 at Messe München, Am Messesee 2, 81829 Munich. Stand set-up runs 4–10 January 2027 and dismantling 15–19 January 2027.
The organiser publishes a hall-plan page on bau-muenchen.com, an interactive floor plan at exhibitors.bau-muenchen.com/en/floor-plan and a downloadable PDF site plan. The show uses 19 halls (A1–A6, B0–B6, C1–C6) plus the ICM.
Technical service orders and suspension (rigging) orders are due by 11 November 2026 in the BAU Exhibitor Shop. Rigging orders need a detailed load plan.
Stand documents go to Messe München's TAS3 team if the stand is higher than 3 m, larger than 100 m², has covered areas or shows a vehicle. The standard stand height in the Technical Guidelines is 3 m.
Yes, if you start now. We design, pre-build in our own production facility in İkitelli OSB, Istanbul and use our Düsseldorf warehouse and Hannover base for German shows. Send your hall and stand number for a quote within one business day.

Start Your Stand ProjectProject Brief

Share the show, city and stand size so we can define the right project scope.

Project-led delivery
In-House Factory
Portfolio on request
Technical support

Global Exhibition Stand Design & Build Locations

We provide turnkey exhibition stand design, production, and installation services at major trade show venues worldwide. Explore our country and venue guides for your target destination.

CallWhatsAppGet Quote