Stand Projesi İçin Teklif Al →

Plast Eurasia 2026 Stand Builder – Quote in 48 Hours

•By Exhibition Stand Pro Team

Short answer: Exhibition Stand Pro (VAV Grup) designs and builds custom stands for Plast Eurasia 2026, the plastics industry fair at Tüyap Fair and Congress Center, 2–5 December 2026, in its own production facility in İkitelli OSB, Istanbul. With four weeks left, send your hall and stand number and stand size on WhatsApp +90 532 457 67 78 or through the quote form and we answer within 48 hours with a first design, a quote and a straight answer on whether your size and finish fit the calendar.

Plast Eurasia 2026 at a glance

Item Plast Eurasia 2026
Dates 2–5 December 2026 (Wednesday to Saturday), the 35th edition
Visitor hours 10:00–18:00 on 2–4 December; 10:00–17:00 on 5 December
Venue Tüyap Fair and Congress Center, Istanbul
Organiser Tüyap Fairs Production Inc. in cooperation with PAGEV; supported by the Ministry of Trade
Core sections Plastics production machinery; raw materials and chemicals; next-generation production technologies
Last edition (2025) 1,503 exhibitors from 44 countries; 76,430 professional visitors, 18% of them foreign
2026 outlook (organiser’s statements) About 90% of exhibition space sold three months before opening; 80,000 visitors expected
Build-up and dismantling Not published online; set in the Participant Handbook on the MyTüyap exhibitor portal
Official site plasteurasia.com

Dates and figures were checked on the organiser’s official site on 29 October 2026.

Four weeks: what fits and what does not

The fair opens on 2 December, four weeks from 3 November. That is enough for many custom stands and not enough for some.

  • Usually fits: a custom stand with straight walls, a branded wall, plinths, a counter and standard finishes; a modular system dressed with custom graphics; a new skin for a stand you already own.
  • Needs a closer look: anything above 4.5 m or on two storeys, which needs an engineer’s approval; curved or one-off geometry; special materials with long lead times.
  • The one date that may already be close: the project-upload deadline in the fair’s timetable. Ask your sales contact for it today.

Tüyap’s ready-stand service is the other route and saves time on a plain stand with a counter and a logo. If you have no plot yet, ask Tüyap’s sales team what is left before commissioning a design; the organiser said about 90% of the space was sold three months ahead.

What a plastics stand has to carry

  • Machine weight. Send the weight and footprint of the heaviest machine so plinths and frames are sized to them. Tüyap names Gruptrans as its appointed handling provider for cranes and forklifts.
  • Power and connections. Electricity is a service the venue reserves for itself, so we draw the power plan with the layout. Check any compressed-air or water connection with the organiser’s technical team.
  • Materials on show. Raw-material and chemical exhibitors show granules and samples. Sealed sample cabinets, lit shelves and a wipeable counter keep them tidy and visible.
  • Noise. A running machine is loud, so the meeting area sits away from it or behind a closed wall.
  • Guided tours. The organiser runs a Hosted Buyer Guided Tour with routes to demonstration areas and a Hosted Buyer Lounge. A stand with a clear front and a place to sit uses those visits.

Who walks the aisles

In 2025 the fair counted 76,430 professional visitors, 18% of them foreign. Expect English-first signage and spec sheets that show a machine’s key numbers at a glance. The 2026 programme adds a 35th-anniversary Milestones Map and 30-minute presentation slots for exhibitors in the foyer.

Tüyap rules to design against

Tüyap’s exhibitor handbook, as quoted in our Türkiye guide, has an architect or interior architect approve stands up to 4.5 m; taller single-storey stands, all two-storey stands and risky structures need a chartered civil engineer’s approval, with the project uploaded to MyTüyap in line with the fair’s timetable. Hanging parts from the hall ceiling, drilling into floors or walls, and gypsum- or cement-derived boards or thinner-based paints are prohibited. That copy is undated, so the Plast Eurasia handbook decides. The floor plan is an image, so ask which hall you are in before choosing a height.

Countdown to 2 December 2026

Date What happens
Tue 3 – Thu 5 Nov You send hall, stand number, size, logo and machine list; we answer within 48 hours, including whether the calendar works for your size and finish
By Fri 6 Nov (4 weeks out) Decision and design direction; frame and flooring can start because they do not depend on the graphics
Wed 11 Nov (3 weeks) Design and print-ready graphics frozen; drawings go to MyTüyap where an engineer’s approval is needed
Wed 18 Nov (2 weeks) Pre-assembly check in İkitelli, with machine plinths and cable routes
Wed 25 Nov (1 week) Loading plan fixed against the first allowed build-up day
Wed 2 Dec Fair opens

Why a stand built in Istanbul suits a short timeline

  • No shipping and no customs. Tüyap and our İkitelli factory are in the same city, so no time is lost to freight.
  • Finishing done before it arrives. Tüyap does not allow gypsum- or cement-derived boards or thinner-based paints in its halls, so panels leave the factory finished.
  • Changes stay possible. If a machine changes or a graphic needs a correction, the workshop is a drive away.

What to send for your free pre-design

  • Hall and stand number, or the floor plan with your stand marked and the open sides shown
  • Stand size in m²
  • Logo as a vector file and brand colours
  • Machine or product list with dimensions, weights and power needs, and which must run
  • Number of staff and meeting seats
  • The Participant Handbook and other organiser documents, if you have them

Get your Plast Eurasia 2026 quote: request a quote or WhatsApp +90 532 457 67 78.

Türkçe sayfa: Plast Eurasia 2026 stand firması. Related: Expomed Eurasia 2027 stand builder and IIFF 2027 stand builder, both at Tüyap, exhibition stand builder in Türkiye and stand rules by venue 2026–27.

Official sources used

Frequently asked questions

The 35th Plast Eurasia runs 2–5 December 2026 at Tüyap Fair and Congress Center in Istanbul. The organiser's exhibitor FAQ gives visitor hours of 10:00–18:00 on 2–4 December and 10:00–17:00 on 5 December.
Not necessarily, but it is tight: the fair opens four weeks after 3 November. A custom stand with straight walls and standard finishes can fit; two-storey, tall or one-off structures may not. Our 48-hour answer says which side yours falls on.
Tüyap offers booth packages through its ready-stand service, which saves time on a plain stand. If your stand has to carry machinery or a closed meeting room, a custom stand fits better. Send your plot plan and we tell you plainly which route suits you.
Yes, if we know the weights early: send the weight and footprint of your heaviest machine and we size plinths and frames to it. Tüyap names Gruptrans as its appointed on-site handling provider for cranes and forklifts. Check any compressed-air or water connection with the organiser's technical team.
Tüyap's exhibitor handbook, as quoted in our Türkiye guide, has an architect or interior architect approve stands up to 4.5 m; taller single-storey stands, all two-storey stands and risky structures need a chartered civil engineer's approval.
They are not published on the Plast Eurasia website. The organiser's exhibitor FAQ refers to the Participant Handbook on the MyTüyap exhibitor portal, with login details emailed after you contract. With four weeks to go, ask your sales contact today.

Stand Projenizi BaşlatınProject Brief

Fuar, şehir ve stand ölçüsünü paylaşın; proje kapsamını birlikte netleştirelim.

Proje bazlı teslimat
Kendi Üretimimiz
Talep üzerine portföy
Teknik destek

Global Fuar Stand Hizmet Bölgelerimiz

Dünyanın dört bir yanındaki fuar merkezlerinde anahtar teslim stand tasarım, üretim ve kurulum hizmetleri sunuyoruz. Hedef ülkenizdeki operasyonlarımız hakkında detaylı bilgi alın.

AraWhatsAppTeklif Al